RUGER WEBSITE SERIAL NUMBER LISTINGS

Anything Ruger related.
Post Reply
flattop44
Posts: 2351
Joined: Tue May 06, 2014 2:31 pm
Location: Alabama

RUGER WEBSITE SERIAL NUMBER LISTINGS

Post by flattop44 »

The link below is to the Ruger firearms serial number ranges listing on their website. It will provide a general idea of the year that your Ruger firearm was made. Of course to get the specifics you would need to print a form from their website and mail it in with your $10 payment for each firearm that you are requesting the info about.
FT44
https://ruger.com/service/productHistory.html.
Herriman
Posts: 1
Joined: Mon May 27, 2019 2:46 am

Re: RUGER WEBSITE SERIAL NUMBER LISTINGS

Post by Herriman »

This listing isn't 100% reliable though, right?
You should consider using sausage stuffers if you like sausages.
flattop44
Posts: 2351
Joined: Tue May 06, 2014 2:31 pm
Location: Alabama

Re: RUGER WEBSITE SERIAL NUMBER LISTINGS

Post by flattop44 »

True, it's not perfect but a usually a pretty good guide. The only real way is to get a factory letter.
Bill
Nahanni
Posts: 70
Joined: Wed Dec 05, 2018 9:44 pm

Re: RUGER WEBSITE SERIAL NUMBER LISTINGS

Post by Nahanni »

All the Hawkeye and Ruger No. 1 serial number references end in 2015
Coogs
Posts: 392
Joined: Fri Jul 04, 2014 8:07 am
Location: NW PA.

Re: RUGER WEBSITE SERIAL NUMBER LISTINGS

Post by Coogs »

The Maxi numbers are off a little bit also......
flattop44
Posts: 2351
Joined: Tue May 06, 2014 2:31 pm
Location: Alabama

Re: RUGER WEBSITE SERIAL NUMBER LISTINGS

Post by flattop44 »

It appears that the Ruger Company has not kept all of this information updated. As you know, a $10 Letter will get you the the month, year and where the gun was shipped to if you really want to know.
Bill
User avatar
hittman
Posts: 196
Joined: Mon Jun 30, 2014 4:59 pm
Location: Illinois

Re: RUGER WEBSITE SERIAL NUMBER LISTINGS

Post by hittman »

I've found that when you request the $10 letter, a nicely worded cover letter asking them specifically what you're looking for or questioning may help.

I found what I thought was a factory made ROUND butt SERVICE Six ..... sent a cover letter asking them if it was possible, how could it be, what's the back story, etc. A nice lady there called me to confirm the butt design the roll mark, then followed up with a very detailed letter.

Worked for me that way also asking about a 1st year Security Six with an "S" stamped after the serial number.
Post Reply