ELMER KEITH'S SPECIAL .44 FLATTOP

Includes all Pre-1973 Old model Single-Sixes, Blackhawks,
Super Blackhawks, Bearcats, Super Bearcats, Hawkeye
and Black Powder Old Army.
flattop44
Posts: 2351
Joined: Tue May 06, 2014 2:31 pm
Location: Alabama

Re: ELMER KEITH'S SPECIAL .44 FLATTOP

Post by flattop44 »

Gary, matter of fact I did shoot it! I put a few .44 Specials through it just so I could say that I had shot the same old .44 Flattop that Elmer did! It shot great!
Bill
JussBad
Posts: 282
Joined: Mon Jun 09, 2014 9:29 pm
Location: No. California

Re: ELMER KEITH'S SPECIAL .44 FLATTOP

Post by JussBad »

That sounds great Bill. I believe I would have done the same thing. A great tribute.
Cal
Posts: 3
Joined: Tue Jan 04, 2022 6:04 pm

Re: ELMER KEITH'S SPECIAL .44 FLATTOP

Post by Cal »

Hello Bill, This is quite a flattop. I believe the grip work done on this flattop in this is the work of Don Mihaljevic, who was Elmer's last gunsmith before Elmer Keith passed. He lived in Salmon and did a few of these back in the old days and is now passed also. I have seen another one exactly like this but a different caliber owned by a very famous person who may not want to be mentioned. He was friends with Elmer and he said Elmer turned him on to this gunsmith and he had some built on old model blackhawks with brass frames and those exact grips just like Elmers. Elmer also had some built himself on blackhawks with adding the brass and grips. If I remember correctly a 41 mag and 45Cal Blackhawk he had worked over by Don. I believe I also read online that John Taffin has also stated that Don did the work on the one you have and the grips are Sheep horn not cow horn as first thought in the auction. Pretty exciting to have Elmers congratulations.
Last edited by Cal on Tue Jan 04, 2022 7:52 pm, edited 1 time in total.
flattop44
Posts: 2351
Joined: Tue May 06, 2014 2:31 pm
Location: Alabama

Re: ELMER KEITH'S SPECIAL .44 FLATTOP

Post by flattop44 »

Cal, thanks for the info especially about the grips being sheep horn. I had heard that Don was Elmer's smith who probably fitted the brass frame and grips. I picked up a boxed grip frame that had never been fitted to a gun that was sent to Don from Sturm, Ruger Co. in 1972. Check out the pics.
FT44/aka Bill
20220105_141157.jpg
Attachments
20220105_114106.jpg
20220105_141030.jpg
20220105_141145.jpg
20220105_141243.jpg
20220105_114057.jpg
mdorton
Posts: 3
Joined: Thu Dec 09, 2021 2:06 pm

Re: ELMER KEITH'S SPECIAL .44 FLATTOP

Post by mdorton »

You are my Hero!
Brass Frame
Posts: 651
Joined: Thu May 15, 2014 3:22 am

Re: ELMER KEITH'S SPECIAL .44 FLATTOP

Post by Brass Frame »

Bill, that is one neat boxed brass frame. You deserve it to stay with your Keith gun! Congrats. brass frame/Lee E
Cal
Posts: 3
Joined: Tue Jan 04, 2022 6:04 pm

Re: ELMER KEITH'S SPECIAL .44 FLATTOP

Post by Cal »

Very Nice, Thanks for posting it.
RugerfanAustria
Posts: 178
Joined: Tue Aug 10, 2021 12:36 pm

Re: ELMER KEITH'S SPECIAL .44 FLATTOP

Post by RugerfanAustria »

congratulations Bill I like the Flattops in general but I'm also a big fan of the 44 caliber. Thank you for sharing this piece of history with us.
User avatar
Rugerologist
Posts: 1016
Joined: Sat Nov 28, 2015 6:31 pm
Location: Arkansas

Re: ELMER KEITH'S SPECIAL .44 FLATTOP

Post by Rugerologist »

Bill, that's a piece of history and a beautiful one at that. I just started reading Hell I was There. Chief AJ gave me the copy that Mr. Keith sent him with a personalized message and autograph. Half of my brain understands why you shot it and the other half is blown away that you did! :D
"I know of no more encouraging fact than the unquestionable ability of man to elevate his life by conscious endeavor." - Henry David Thoreau
Aquatic Biologist
NRA Life Member
R.O.C.S. Editor
R.C.A. Member #5050
R.E.N.E Subscriber
flattop44
Posts: 2351
Joined: Tue May 06, 2014 2:31 pm
Location: Alabama

Re: ELMER KEITH'S SPECIAL .44 FLATTOP

Post by flattop44 »

I reallly enjoyed shooting it, I visualized old Elmer and Don Martin were there with me throwing lead down range!! 😀
Bill
Post Reply