RSSM 300006
Posted: Tue May 10, 2022 4:11 pm
NIB with the extra 22LR cylinder.....
Page 1 of 3
Re: RSSM 300006
Posted: Tue May 10, 2022 4:18 pm
Just plain beautiful!
Re: RSSM 300006
Posted: Tue May 10, 2022 5:27 pm
Magnificent!!
Re: RSSM 300006
Posted: Tue May 10, 2022 8:39 pm
That's a great single digit mag only, love the complete package!! You done good with this batch!
FT44
FT44
Re: RSSM 300006
Posted: Tue May 10, 2022 9:59 pm
Nice job RR. Did you happen to get the BKH45 also? If memory serves me I chased down 45-00006 for Adamson and Fairbanks about 30 miles from me. I could be off a digit or so on the number but it was a single digit. Perhaps Steve can chime in. Either way, enjoy looking at the single digits.
GW
GW
Re: RSSM 300006
Posted: Wed May 11, 2022 6:16 am
Several more links in the unending chain!! 
Good for you.
Terry
Good for you.
Terry
Re: RSSM 300006
Posted: Wed May 11, 2022 11:49 am
Rod,
So the sleeve stamp just says RSSM?
Be sure if the cylinders are chambered for .22 LR or .22 Mag.
I think it is #300023 that has a Mag cylinder in it but at the rear is a firing pin groove (they hadn't yet decided to make the mag cylinder without the groove at the time that cylinder was made... pre-production stuff).
By the way... that is a real prize in a low Mag. marked Single-Six... most of the subscribers at that time didn't get their example.
It would be interesting to see how 300006 shipped, as RSSM or RSSMX. My bet is, you have two cylinders there that are both chambered for Mag.... and one has a firing pin groove.
Chet15
So the sleeve stamp just says RSSM?
Be sure if the cylinders are chambered for .22 LR or .22 Mag.
I think it is #300023 that has a Mag cylinder in it but at the rear is a firing pin groove (they hadn't yet decided to make the mag cylinder without the groove at the time that cylinder was made... pre-production stuff).
By the way... that is a real prize in a low Mag. marked Single-Six... most of the subscribers at that time didn't get their example.
It would be interesting to see how 300006 shipped, as RSSM or RSSMX. My bet is, you have two cylinders there that are both chambered for Mag.... and one has a firing pin groove.
Chet15
Re: RSSM 300006
Posted: Fri May 13, 2022 12:07 pm
Serial # 300009 is just like the Serial #300006 LNIB with sleeve!
Great Snag R.R.!
Great Snag R.R.!
Re: RSSM 300006
Posted: Fri May 13, 2022 6:53 pm
Nice one for sure!
Looking forward to more of those goodies too!
Looking forward to more of those goodies too!
Re: RSSM 300006
Posted: Thu May 19, 2022 2:38 pm
A really nice piece that I would also like to have in my collection