Page 1 of 2
Minute of barrel 10/22
Posted: Wed May 28, 2025 9:55 am
by radicalrod
Re: Minute of barrel 10/22
Posted: Thu May 29, 2025 7:44 am
by T.A. Workman
Re: Minute of barrel 10/22
Posted: Thu May 29, 2025 12:25 pm
by Watertender
Re: Minute of barrel 10/22
Posted: Thu May 29, 2025 1:43 pm
by JAYDAWG
Here is my TD with the Gemtech Mist suppressed barrel.
I had the same problem at first & figured out the big silver nut needs to be adjusted out as far as possible and still allow the barrel to be twisted in. Too loose and accuracy is MOB for sure.
Hey Watertender......yer just jealous I HAVE HAIR TO SHAMPOO!!!!

Re: Minute of barrel 10/22
Posted: Fri May 30, 2025 6:08 pm
by Watertender
JAYDAWG I have a 4ft Stillson wrench to adjust the big nut on top of your neck!
Re: Minute of barrel 10/22
Posted: Sat May 31, 2025 6:25 pm
by radicalrod
Well got it down to minute of beer can today......had to mark my hands with an L and R ......kept turning the adjusters the wrong way

Re: Minute of barrel 10/22
Posted: Sat May 31, 2025 7:04 pm
by JAYDAWG
Re: Minute of barrel 10/22
Posted: Mon Jun 02, 2025 12:58 pm
by radicalrod
Re: Minute of barrel 10/22
Posted: Mon Jun 02, 2025 9:15 pm
by JAYDAWG
Right after you shoot a marble off the top of watertenders head, I will hold the (empty) beer can!!!

Re: Minute of barrel 10/22
Posted: Fri Jun 06, 2025 6:16 pm
by Watertender
JAYDAWG wrote: âMon Jun 02, 2025 9:15 pm
Right after you shoot a marble off the top of watertenders head, I will hold the (empty) beer can!!!
We're going to start out with a green bowling ball and work down from there.

We want him to get it dialed in properly!