I added a set of Ajax 31 grips to my Wrangler and they fit really good, blends with the silver Cerakote. They came on the engraved 1964 SC6 and I put original grips on it so the Ajaxs were just sitting there.
Bennett
Ruger Wrangler
-
67stingray
- Posts: 239
- Joined: Thu Jul 26, 2018 7:35 pm
-
Rugerologist
- Posts: 856
- Joined: Sat Nov 28, 2015 6:31 pm
- Location: Arkansas
Re: Ruger Wrangler
Now that looks good!
"I know of no more encouraging fact than the unquestionable ability of man to elevate his life by conscious endeavor." - Henry David Thoreau
Aquatic Biologist
NRA Life Member
R.O.C.S. Member
R.C.A. Member #5050
R.E.N.E Subscriber
Aquatic Biologist
NRA Life Member
R.O.C.S. Member
R.C.A. Member #5050
R.E.N.E Subscriber
Re: Ruger Wrangler
They do look good, got you spiffed up SA fitting to wear to a Barbecue!! 
Bill
Bill
-
67stingray
- Posts: 239
- Joined: Thu Jul 26, 2018 7:35 pm
Re: Ruger Wrangler
Thanks guys, shot it some more yesterday and decided going to have to paint the front edge of the front sight blade, it's very thin and the color really blends in with the sight picture. It shoots really good and is very tight and the loading gate is loosening up, if you haven't already gotton one I highly advise you do so, it's a lot of gun for the price.
Bennett
Bennett
Any day without learning is a day of backing up.
-
Watertender
- Posts: 486
- Joined: Tue Sep 08, 2015 3:42 pm
Re: Ruger Wrangler
As my one buddy used to say.... "That there is right purty!" Bennett you have a winner with the way you fancified your Wrangler.
Some people sit on $.05 of knowledge like it is the treasure of Egypt. I will teach anyone $.10 worth just to prove a point...
Re: Ruger Wrangler
Dang it man....that is COOL !!!! 
JD
JD
I do not "own" these guns, I am but the next caretaker
Re: Ruger Wrangler
Sounds like they should make a triple matching set.
I don't know if the fine line would be crossed but I suspect the could have the same serial no, finishes are different models.
I don't know if the fine line would be crossed but I suspect the could have the same serial no, finishes are different models.
Re: Ruger Wrangler
I believe it was made to compete with rr model economy line I had one for a few weeks, even bought a 22 mag cyclinder for it and with a little fitting ran 12 rnds through it fine , than I red an article stating that barrel is only cut to the long rifel size and that the fauling from jackeded bullet will cause issues , so boys and girls don't put a 22 mag cyclinder in this revolver I know everyone wants to but it is only intended to be a plinker very good for Yong starters.
It is only intended for economy line.
It is only intended for economy line.