unique early 10/22 bolts
Posted: Sat Mar 28, 2015 9:40 pm
Hey Vaughn, I came across another one of these.
They both Letter November 64'... so that's cool!
They both Letter November 64'... so that's cool!
RugerSociety.com
Ruger Owners & Collectors Society
https://www.rugersociety.com/forums/
unique early 10/22 bolts
Page 1 of 2
Re: unique early 10/22 bolts
Posted: Sun Mar 29, 2015 8:41 am
I don't think I have one of those.
Re: unique early 10/22 bolts
Posted: Sun Mar 29, 2015 10:19 am
Well that's the best news yet!
Mark 2, Vaughn 0
Mark 2, Vaughn 0
Re: unique early 10/22 bolts
Posted: Sat May 28, 2016 7:27 pm
Is there a story behind why the bolt has this hole? How rare are these bolts?
Re: unique early 10/22 bolts
Posted: Mon May 30, 2016 12:08 am
I haven't heard any more about these...do you have one?
Re: unique early 10/22 bolts
Posted: Mon May 30, 2016 6:39 pm
Not yet, but I found one online I would like to buy. Just need to save up for it. Was just curious since I've never seen nor heard anything before seeing your post.
Re: unique early 10/22 bolts
Posted: Sat Jun 11, 2016 4:28 pm
It is pretty unusual for something like that to be discovered fifty-some years after they were made. Are you sure that was done by the factory?
Chet15
Chet15
Re: unique early 10/22 bolts
Posted: Sun Jun 19, 2016 12:51 am
looking at the guns...there were no other modifications...I got these at different times from different sellers but they letter going out the same month from the factory...
Re: unique early 10/22 bolts
Posted: Sun Jun 19, 2016 4:25 pm
There should be a reason for the hole. Are you able to determine if it is for gas relief?
Chet15
Chet15
Re: unique early 10/22 bolts
Posted: Sat Jun 25, 2016 12:01 am
It's not a different pin than normal...the hole just goes all the way first through...I thought it might be a try at an easier bolt assembly??