If you are discussing the assembly/disassembly screw set offered as a set for OM's & NM's several years ago,, they look like this;
Working on the SA's
Working on the SA's
When we get to tinkering with our Ruger SA handguns,, we often have to disassemble & re-assemble them often. Long ago, I found a set of "tools" to make this super easy. A recent post elsewhere caused me to post the info there. I figured I'd share it here.
If you are discussing the assembly/disassembly screw set offered as a set for OM's & NM's several years ago,, they look like this;
If you are discussing the assembly/disassembly screw set offered as a set for OM's & NM's several years ago,, they look like this;
Re: Working on the SA's
I forgot to add that I have since modified 92) of the grip frame screws a little. I chucked them in my lathe, and cut back the hex sides a little further. I found the screw shanks could possibly rub the trigger guard on a few of them. So I cut the hex edges back a bit & rounded them a little too.